Get ready for the great adventure of your life - the Karga is ready! Carbon frame enduro pedelec for endless adventure. This enduro bike is available with two types of engine. Karga uses Shimano's EP6 and EP801 systems. The EP6 motor has a power of 630W and a torque of 85Nm. And the battery is capable of 630Wh. The motor of the EP801 has a power of 820W and a torque of 85Nm. And the battery is capable of 820Wh.
Carbon fiber fabrics can be grouped in two ways. We can categorize according to tissue density and their types. There are classic crocheted (e.g. 1K, 3K, 12K) fabrics, and there are unidirectional, i.e. non-crocheted UD (unidirectional) fabrics.
The other grouping point is that a carbon fiber fabric has a high modulus, is strong, or is capable of high resistance. The former are very stiff and light, the latter are extremely resistant and more flexible. You cannot build a frame that is light, rigid and suitable for racing at a serious level without the dominant use of the former! However, without the latter, frame production does not exist.
Wilier works with Mitsubishi carbon and its own developed premium fabrics, and it uses fabrics jointly dreamed up with several manufacturers.
HUS-MOD: One of the best quality carbon fabrics made exclusively for Wilier. The 65TON hyper high modulus carbon fabric supplemented with Liquid Crystal technology is always stiff when it is most needed, but can also offer comfort when appropriate. A unique development from a unique manufacturer.
NH-MOD/NHU-MOD: The carbon fabric of the NH-MOD and NHU-MOD represents an unparalleled balance of performance and comfort for everyone. A high degree of rigidity and comfort - above all, the reality of perfect synergy characterizes this product.
60TON: Mitsubishi's 60TON carbon fabric represents an exceptional balance of performance and lightness for all cyclists. It is also characterized by excellent rigidity and good vibration absorption.
46TON: Mitsubishi's all-in-one multifunctional carbon fabric. Adequate stiffness and exceptional comfort were the focus of the design work.
The front triangle of the Wilier Karga frame is made of NH-MOD high modulus carbon, and the rear suspension is made of 6061 T6 aluminum. The head tube angle is sufficiently flat, and in all elements of the frame, we get a geometry that is extremely suitable for downhill riding + there is the motorized assistance at the top. It moves 160 mm from front to back, which predestines the Karga for enduro use.
Crank + Rock Shox + Deore 1x12 + Shimano: Shimano Deore 1x12 mechanical parts family, Rock Shox 35S TK 160 mm travel fork and Shimano MT620 wheels are well complement each other. In terms of assistance, they didn't compromise either: Shimano EP6 motor, which can assist up to 25 km/h. 85 Nm torque, 630 W auxiliary power and 630 Wh battery capacity.